merv
|
|
« Reply #150 on: February 27, 2018, 07:46:44 PM » |
|
Is the angle sensor a 3 wire green plug type.
no its not, the lean angle sensor is next door to the lean angle sensor relay The sensor is connected to the relay by a red wire The sensor is connected to the relay by a black wire from the sensor i have a green wire going to earth from the relay i have a black wire going to a 10A fuse in the fuse box for the ignition, starter and alternator from the relay i have a brown with yellow chase going to the starter switch, Does any of this makes sense to you ? No
|
|
|
Logged
|
Why do every five minute job take all day, and if it can go wrong it will go wrong
|
|
|
terry t
|
|
« Reply #151 on: February 27, 2018, 07:55:28 PM » |
|
Is the angle sensor a 3 wire green plug type.
no its not, the lean angle sensor is next door to the lean angle sensor relay The sensor is connected to the relay by a red wire The sensor is connected to the relay by a black wire from the sensor i have a green wire going to earth from the relay i have a black wire going to a 10A fuse in the fuse box for the ignition, starter and alternator from the relay i have a brown with yellow chase going to the starter switch, Does any of this makes sense to you ? No Have you looked on a st1100 forum. i think it called a bank angle sensor a saftey device. if the bike goes over when riding it kills the fuel pump and engine. dont think you can just unplug it.
|
|
|
Logged
|
|
|
|
paulywombats
|
|
« Reply #152 on: February 27, 2018, 10:39:13 PM » |
|
I think it may be the engine stop relay and sensor
|
|
|
Logged
|
I thought I was wrong once, it turned out I was incorrect! Living on a wing and a weld
|
|
|
merv
|
|
« Reply #153 on: March 12, 2018, 09:31:05 PM » |
|
|
|
|
Logged
|
Why do every five minute job take all day, and if it can go wrong it will go wrong
|
|
|
paulywombats
|
|
« Reply #154 on: March 13, 2018, 01:38:06 PM » |
|
I think they will fit, they have a 30 days return policy.
|
|
|
Logged
|
I thought I was wrong once, it turned out I was incorrect! Living on a wing and a weld
|
|
|
merv
|
|
« Reply #155 on: March 13, 2018, 05:07:38 PM » |
|
I need help. The engineer i use has gone out of business. I have found another one who thinks he can turn down the hubs but he wants the best part of 100 quid. I could be wrong but i think that's a bit steep. Can any one help.
|
|
|
Logged
|
Why do every five minute job take all day, and if it can go wrong it will go wrong
|
|
|
paulywombats
|
|
« Reply #156 on: March 13, 2018, 06:01:17 PM » |
|
Way too much Merv, shop around, must be more engineering places in your neck of the woods.
|
|
|
Logged
|
I thought I was wrong once, it turned out I was incorrect! Living on a wing and a weld
|
|
|
terry t
|
|
« Reply #157 on: March 13, 2018, 10:13:17 PM » |
|
What do you want to turn down the hubs for.
|
|
|
Logged
|
|
|
|
paulywombats
|
|
« Reply #158 on: March 13, 2018, 11:08:05 PM » |
|
It's either turn down the hub or machine the inside of the disc to get them to fit. If the hub is machined, you can easily replace the discs as required.
I also added this boss as a locator for the wheel, better practice than relying on the wheel studs.
|
|
« Last Edit: March 13, 2018, 11:12:07 PM by paulywombats »
|
Logged
|
I thought I was wrong once, it turned out I was incorrect! Living on a wing and a weld
|
|
|
merv
|
|
« Reply #159 on: March 14, 2018, 05:04:11 AM » |
|
Hi Paul Did you do your own, if so fancy doing mine, i could have a road trip out to yours
|
|
|
Logged
|
Why do every five minute job take all day, and if it can go wrong it will go wrong
|
|
|
paulywombats
|
|
« Reply #160 on: March 14, 2018, 02:56:54 PM » |
|
More than capable, just no equipment any more.
|
|
|
Logged
|
I thought I was wrong once, it turned out I was incorrect! Living on a wing and a weld
|
|
|
merv
|
|
« Reply #161 on: March 14, 2018, 05:30:26 PM » |
|
Thats a shame.
|
|
|
Logged
|
Why do every five minute job take all day, and if it can go wrong it will go wrong
|
|
|
terry t
|
|
« Reply #162 on: April 01, 2018, 08:09:11 AM » |
|
Managed to get to the lathe Merv. I wanted to machine some parts for a project I'm doing and done these at the same time. you going to Basingstoke in May. I will pm you later
|
|
|
Logged
|
|
|
|
merv
|
|
« Reply #163 on: April 01, 2018, 01:26:52 PM » |
|
The plan is for me to be there, since i started coming i haven't missed one
|
|
|
Logged
|
Why do every five minute job take all day, and if it can go wrong it will go wrong
|
|
|
merv
|
|
« Reply #164 on: April 07, 2018, 06:05:54 PM » |
|
No going back now, made a start on the swing arm
|
|
|
Logged
|
Why do every five minute job take all day, and if it can go wrong it will go wrong
|
|
|
|