December 11, 2018, 04:07:51 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Manky Monkey Motors Merchandise now available Cool Items at cool prices http://www.mankymonkeymotors.co.uk/merchandise.html
 
   Home   Help Search Calendar Gallery Login Register  
Pages: 1 ... 9 10 [11] 12 13 14
  Print  
Author Topic: look at what i have been given  (Read 8486 times)
merv
Hero Member
*****

Karma: 88
Posts: 2721



« Reply #150 on: February 27, 2018, 07:46:44 PM »

Is the angle sensor a 3 wire green plug type.

no its not, the lean angle sensor is next door to the lean angle sensor relay
The sensor is connected to the relay by a red wire
The sensor is connected to the relay by a black wire
from the sensor i have a green wire going to earth
from the relay i have a black wire going to a 10A fuse in the fuse box for the ignition, starter and alternator
from the relay i have a brown with yellow chase going to the starter switch,
Does any of this makes sense to you ?
No
 


 Grin Grin Grin
Logged

Why do every five minute job take all day, and
if it can go wrong it will go wrong
terry t
Hero Member
*****

Karma: 35
Posts: 2432


not my best side


« Reply #151 on: February 27, 2018, 07:55:28 PM »

Is the angle sensor a 3 wire green plug type.

no its not, the lean angle sensor is next door to the lean angle sensor relay
The sensor is connected to the relay by a red wire
The sensor is connected to the relay by a black wire
from the sensor i have a green wire going to earth
from the relay i have a black wire going to a 10A fuse in the fuse box for the ignition, starter and alternator
from the relay i have a brown with yellow chase going to the starter switch,
Does any of this makes sense to you ?
No
 


 Grin Grin Grin
Have you looked on a st1100 forum. i think it called a bank angle sensor a saftey device.  if the bike goes over when riding it kills the fuel pump and engine. dont think you can just unplug it.

Logged

Portsmouth Trikers    find us on facebook
paulywombats
Hero Member
*****

Karma: 34
Posts: 512



« Reply #152 on: February 27, 2018, 10:39:13 PM »

I think it may be the engine stop relay and sensor
Logged

I thought I was wrong once, it turned out I was incorrect!
Living on a wing and a weld
merv
Hero Member
*****

Karma: 88
Posts: 2721



« Reply #153 on: March 12, 2018, 09:31:05 PM »

Would these be suitable for the disc brake conversion

 https://www.ebay.co.uk/itm/2-x-FOR-VW-Golf-MK4-1998-2005-1-4-1-6-1-8T-1-9-TDI-2-0-Rear-Brake-Calipers/282875901090?ssPageName=STRK%3AMEBIDX%3AIT&_trksi
Logged

Why do every five minute job take all day, and
if it can go wrong it will go wrong
paulywombats
Hero Member
*****

Karma: 34
Posts: 512



« Reply #154 on: March 13, 2018, 01:38:06 PM »

I think they will fit, they have a 30 days return policy.
Logged

I thought I was wrong once, it turned out I was incorrect!
Living on a wing and a weld
merv
Hero Member
*****

Karma: 88
Posts: 2721



« Reply #155 on: March 13, 2018, 05:07:38 PM »

I need help. The engineer i use has gone out of business. I have found another one who thinks he can turn down the hubs but he wants the best part of 100 quid. I could be wrong but i think that's a bit steep. Can any one help.
Logged

Why do every five minute job take all day, and
if it can go wrong it will go wrong
paulywombats
Hero Member
*****

Karma: 34
Posts: 512



« Reply #156 on: March 13, 2018, 06:01:17 PM »

Way too much Merv, shop around, must be more engineering places in your neck of the woods.
Logged

I thought I was wrong once, it turned out I was incorrect!
Living on a wing and a weld
terry t
Hero Member
*****

Karma: 35
Posts: 2432


not my best side


« Reply #157 on: March 13, 2018, 10:13:17 PM »

What do you want to turn down the hubs for.
Logged

Portsmouth Trikers    find us on facebook
paulywombats
Hero Member
*****

Karma: 34
Posts: 512



« Reply #158 on: March 13, 2018, 11:08:05 PM »

It's either turn down the hub or machine the inside of the disc to get them to fit. If the hub is machined, you can easily replace the discs as required.

I also added this boss as a locator for the wheel, better practice than relying on the wheel studs.
« Last Edit: March 13, 2018, 11:12:07 PM by paulywombats » Logged

I thought I was wrong once, it turned out I was incorrect!
Living on a wing and a weld
merv
Hero Member
*****

Karma: 88
Posts: 2721



« Reply #159 on: March 14, 2018, 05:04:11 AM »

Hi Paul
Did you do your own, if so fancy doing mine, i could have a road trip out to yours  Smiley
Logged

Why do every five minute job take all day, and
if it can go wrong it will go wrong
paulywombats
Hero Member
*****

Karma: 34
Posts: 512



« Reply #160 on: March 14, 2018, 02:56:54 PM »

More than capable, just no equipment any more.

Logged

I thought I was wrong once, it turned out I was incorrect!
Living on a wing and a weld
merv
Hero Member
*****

Karma: 88
Posts: 2721



« Reply #161 on: March 14, 2018, 05:30:26 PM »

Thats a shame.
Logged

Why do every five minute job take all day, and
if it can go wrong it will go wrong
terry t
Hero Member
*****

Karma: 35
Posts: 2432


not my best side


« Reply #162 on: April 01, 2018, 08:09:11 AM »

Managed to get to the lathe Merv.
I wanted to machine some parts for a project I'm doing and done these at the same time.
you going to Basingstoke in May. I will pm you later
Logged

Portsmouth Trikers    find us on facebook
merv
Hero Member
*****

Karma: 88
Posts: 2721



« Reply #163 on: April 01, 2018, 01:26:52 PM »

The plan is for me to be there, since i started coming i haven't missed one 
Logged

Why do every five minute job take all day, and
if it can go wrong it will go wrong
merv
Hero Member
*****

Karma: 88
Posts: 2721



« Reply #164 on: April 07, 2018, 06:05:54 PM »

No going back now, made a start on the swing arm   Smiley
Logged

Why do every five minute job take all day, and
if it can go wrong it will go wrong
Pages: 1 ... 9 10 [11] 12 13 14
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!