For sale 2 litre Pinto injection complete, all but the fuel rail. This was the engine that we had in our roadster for 3 years until we upgraded to a Cosworth YB. Since then it’s been gathering dust, so now is the time to move it on.
Being injection, it has a 205 block, the head was rebuilt about 5000 miles ago (with a new cam, rockers and oil tube). It also comes with a stainless steel tube exhaust manifold (minus the end flange). It comes with distributor, coil, engine loom and ECU. Simple to wire into a vehicle (6 wires, I think, all marked).
Pinto injection engine and a supercharger kit for a Pinto. SOLD
Pinto injection engine and a supercharger kit for a Pinto. SOLD
Pinto injection engine and a supercharger kit for a Pinto. SOLD
It has been inspected after it was removed from the roadster, as we were going to stick it in some thing else.
This is the big ends and mains.
Pinto injection engine and a supercharger kit for a Pinto. SOLD
And the bores, you can see the cross hatching is still good.
Pinto injection engine and a supercharger kit for a Pinto. SOLD
It then was assembled with new gaskets and filled with fresh oil and a new filter and the oil pressure checked by turning the drive with a speed brace by hand.
Pinto injection engine and a supercharger kit for a Pinto. SOLD
This engine is supplied with a 2 litre flywheel .
Price £250 ono
Supercharger kit for 2 litre Pinto.
This “kit” was run on the above engine for 3 years with no problems.
Pinto injection engine and a supercharger kit for a Pinto. SOLD
It consists of a Eaton M45 supercharger (merc 180).
Pinto injection engine and a supercharger kit for a Pinto. SOLD
Highly modified Pinto injection inlet manifold (complete).
Pinto injection engine and a supercharger kit for a Pinto. SOLD
Mounting bracket for the supercharger, Multi “V” pulleys and new belt, additional fuel regulator, air trunking and air cleaner box with K&N filter.
As an example it looks like this on the engine (but is not sold with an engine, just the kit)
Pinto injection engine and a supercharger kit for a Pinto. SOLD
Pinto injection engine and a supercharger kit for a Pinto. SOLD
There are two items that will be required to install this kit, A balance valve and a fabricated outlet for the supercharger to the inlet manifold tube.
Price £350 ono
Will do a deal for the engine and kit together, and willing to give assistance and advice on fitting (physical, depending on location)
Thanks for the add
Chris 07703 186355