|
Title: Stainless Reliant exhaust manifold Post by: Manky Monkey on July 19, 2009, 10:24:14 AM For Sale as no longer required.
I had a guy in Mitcham knock this up for my trike project, but then decided to go with a mild steel one I bought from Ebay. Lazer cut stainless steel mounting flange with the 4 pipes running into 2 then into a collector. The collector's only tacked in place, the welds need prettying up & the whole thing polished, but will look great when it's done & eliminate that problem of constantly having to re-paint your standard ugly cast iron manifold when the high temp' paint burns off after a couple of weeks. You'll need to space your carb manifold out from the engine by 2 inches to clear the exhaust but that's easy to do with a couple of off-cuts of tube & 10 minutes welding. Yours for 50 quid. PM me or email me via the address on the Contacts page of the main site. Title: Re: Stainless Reliant exhaust manifold Post by: Manky Monkey on July 19, 2009, 03:59:27 PM Sold to Mr Triker Pete. :)
|