|
Title: honda yoke question Post by: afghanman on April 14, 2010, 11:10:25 AM Anyone know what Honda model this is from? if so do you have any dimensions of one, I want to fit it to my vte project but the hole spacing is too wide for the vte yoke.
(http://i171.photobucket.com/albums/u284/afghanman_photos/bikes/ugly%20duckling/platiene.jpg) Title: Re: honda yoke question Post by: nabsim on April 14, 2010, 12:32:06 PM I have something similar to that that came off a CB900 from the 80's. The housing looks a little different though but I haven't seen it for a while. Will see if I can find it tonight and if it is the same I will let you know.
Title: Re: honda yoke question Post by: afghanman on April 14, 2010, 04:38:50 PM Thanks for the reply 8) I have the light thingy Now i need the yokes to fit it to! I need to see if what ever model yokes that thing fits, can be a straight swap for the vte top yoke,,,,,,,,,if that makes sense ???
Title: Re: honda yoke question Post by: panthershaun on April 14, 2010, 05:39:38 PM clear as mud Paul ;D ;D ;D ;D ;D
Title: Re: honda yoke question Post by: gpz on April 14, 2010, 06:15:26 PM it looks like it could have come off a late seventys honda cb 500/4 or even an early cb 750
Title: Re: honda yoke question Post by: afghanman on April 14, 2010, 06:41:37 PM clear as mud Paul ;D ;D ;D ;D ;D :D :D :D non funtioning brain today ::) Title: Re: honda yoke question Post by: Manky Monkey on April 14, 2010, 06:42:21 PM :P I was thinking 70s CB range too.
Title: Re: honda yoke question Post by: terry t on April 14, 2010, 06:45:22 PM Yes 70s cb 500/4. dont think they were on cb 750/4
Title: Re: honda yoke question Post by: BikerGran on April 14, 2010, 06:52:22 PM And it's not a 400/4
Title: Re: honda yoke question Post by: toad on April 14, 2010, 07:52:19 PM thats a cb900 custom one of those jank 10 speed jobs ;D
Title: Re: honda yoke question Post by: nabsim on April 15, 2010, 12:45:35 PM Mine is a bit different casing to that one in the pic but lights the same. I may be wrong about the CB900 bit cos I also got a CB750 front end. Thinking about it I am almost certain I only got the fork legs off the CB900 and the complete front end was 750. This would have been a late 70's to early 80's but can't tell exactly how old.
Title: Re: honda yoke question Post by: Cabman77 on April 15, 2010, 01:03:46 PM I`ve had a few Honda K3 550/4s and they all had a console like that. They were most probably interchangeable because I`v also seen them on the K1 750/4s.
Hope that helps mate 8) Title: Re: honda yoke question Post by: Clive on April 15, 2010, 01:27:52 PM No help whatsoever, but it looks like a playstation controller to me!! :D
Clive Title: Re: honda yoke question Post by: afghanman on April 15, 2010, 03:42:02 PM Just found these three on ebay,
are all honda yokes interchangeable? The vte stantions are 38mm 18cm apart at the centers. (http://i171.photobucket.com/albums/u284/afghanman_photos/bikes/ugly%20duckling/cb7504.jpg) (http://i171.photobucket.com/albums/u284/afghanman_photos/bikes/ugly%20duckling/cb500.jpg) (http://i171.photobucket.com/albums/u284/afghanman_photos/bikes/ugly%20duckling/cb750.jpg) |