Manky Monkey Motors

General Category => General Discussion => Topic started by: reliantman on April 05, 2008, 04:46:19 PM



Title: Been Welding
Post by: reliantman on April 05, 2008, 04:46:19 PM
It has been a while, but I have finally decided what I am doing with my bits.
VB gave me a lump & gearbox, and I cut up the spare Ural frame I had here. Its going to have leading links with a Suzi GS 850 back wheel fitted.


Title: Re: Been Welding
Post by: Manky Monkey on April 05, 2008, 08:46:46 PM
That's an interesting build. Have you got enough room in the frame to lift the rocker cover off to set the tappets? -I know from my own trike that it's easy to make it too tight!


Title: Re: Been Welding
Post by: reliantman on April 05, 2008, 09:05:04 PM
You know I did'nt think of that. There is enough room to drop the whole engine down, but it seems a lot to have to do to set the tappets. Bummer!


Title: Re: Been Welding
Post by: reliantman on April 06, 2008, 09:28:09 AM
I had another play this morning. I can gain a few inches by moving the engine foward a bit.
Also tried it with the Ural front wheel.


Title: Re: Been Welding
Post by: VALLEYSBOY on April 06, 2008, 10:11:41 AM
its coming along :) but i suspect u are gonna ave to persuade the frame to bend a tad more for that rocker cover


Title: Re: Been Welding
Post by: reliantman on April 06, 2008, 10:23:22 AM
If I can get in there with the disc cutter I will take some metal out from under the join where the arrow is.


Title: Re: Been Welding
Post by: Manky Monkey on April 06, 2008, 10:33:48 AM
Don't forget you need room for a fan & radiator too!


Title: Re: Been Welding
Post by: reliantman on April 06, 2008, 10:59:14 AM
I'm going to try it in front of the frame.


Title: Re: Been Welding
Post by: reliantman on April 09, 2008, 10:09:37 AM
This morning I was having a look at the axle mounts, and also found room to prop a scabby old rad in to see if it fitted.
Loads of room in there and the water pipes almost line up.


Title: Re: Been Welding
Post by: texon on April 09, 2008, 04:56:03 PM
Its great when plans come together  ;D


Title: Re: Been Welding
Post by: reliantman on April 16, 2008, 01:48:22 PM
Been out again in the sun today, and did this. All the bits are tied together with string, but it gives me an idea where everything will go. There will be big ball bearing sets at all points to keep it on the right track.


Title: Re: Been Welding
Post by: VALLEYSBOY on April 16, 2008, 01:52:00 PM
taking shape young man ;D


Title: Re: Been Welding
Post by: reliantman on April 16, 2008, 01:58:24 PM
I hav'nt been up to much as the mrs has been bad, but she decided to have a potter in the garden today so I went out as well.

You ok?


Title: Re: Been Welding
Post by: Manky Monkey on April 16, 2008, 06:30:39 PM
I'd just like to point out that MMMotors doesn't condone the use of string as an alternative to welding.

Try Gaffer tape. ;)


Title: Re: Been Welding
Post by: mouse on April 16, 2008, 06:56:52 PM
I'd just like to point out that MMMotors doesn't condone the use of string as an alternative to welding.

Try Gaffer tape. ;)
hey theres nowt wrong with string just as long as you double knot it pmsl  ;D


Title: Re: Been Welding
Post by: reliantman on April 16, 2008, 07:14:51 PM
Only best quality string used in construction.   :D


Title: Re: Been Welding
Post by: VALLEYSBOY on April 17, 2008, 06:57:14 AM
;D


Title: Re: Been Welding
Post by: klogan45 on April 17, 2008, 06:44:40 PM
Baling twine...thats what you need. It seems to hold farms together so a trike should pose no problems. A farm is a lot bigger, though slower, than a trike!! ;)


Title: Re: Been Welding
Post by: tazet on April 17, 2008, 08:34:48 PM
Oh got lots of that if anyone needs any


Title: Re: Been Welding
Post by: BikerGran on April 17, 2008, 09:02:59 PM
I used to know a song about that.....


Forgotten now like so much else - prolly best really.....


Title: Re: Been Welding
Post by: VALLEYSBOY on April 17, 2008, 09:24:28 PM
mouse hunt anyone ? ;)


Title: Re: Been Welding
Post by: tazet on April 17, 2008, 10:52:55 PM
You leave Mousy Boy out of it  ;D


Title: Re: Been Welding
Post by: twolanes on April 17, 2008, 10:56:35 PM
only top quality cable ties and masking tape used here.


Title: Re: Been Welding
Post by: Manky Monkey on April 17, 2008, 10:57:12 PM
There speaks a proper racer!


Title: Re: Been Welding
Post by: twolanes on April 17, 2008, 10:59:17 PM
Many years ago a top funny car team damaged the roof of there race car, they cut the roof off another teams spare car and held it on with racers tape.
And this is a true story.


Title: Re: Been Welding
Post by: twolanes on April 17, 2008, 10:59:53 PM
There speaks a proper racer!
no mate, its me  ;)


Title: Re: Been Welding
Post by: mouse on April 18, 2008, 09:02:52 AM
Theres nowt wrong with mousy boy construction  ;D ;D
(http://i31.photobucket.com/albums/c355/007mouse/RetroMouse_Trap_1963.jpg)
I learnt from the best
Blue Peter  ;D ;D


Title: Re: Been Welding
Post by: VALLEYSBOY on April 18, 2008, 09:41:54 AM
a world without string is a world in chaos :)


Title: Re: Been Welding
Post by: blair on April 18, 2008, 10:47:25 AM
with all this talk of tape and tie wraps i thought id entered a bondage site by mistake ( or not )   ;) ;D :P


Title: Re: Been Welding
Post by: tazet on April 18, 2008, 04:35:57 PM
lol  ;D


Title: Re: Been Welding
Post by: reliantman on April 18, 2008, 05:55:34 PM
Pass those nipple clamps.  :'(