hillman superminx 1962

[Manky Monkey]

All sounding a lot more hopeful now Chris. Fingers crossed for you. 

[poprodder]

thank you andy, i'll get some pics tomorrow.

[poprodder]

erm....................forgot the pics, behaved itself, still not right but 99% better.
i must set the caster angle though!!!! still no bump steer or anything which puts you of driving.

so a rack mounted onto the beam with sliding joint on column works a treat.

[poprodder]

well slow progress, in the middle of sorting caster angle. no pics yet.
hopefully have it out tomorrow!!!

[Manky Monkey]

I'd offer advice, but that's clever stuff & therefore beyond me completely.

[poprodder]

pics at last!!!

[Manky Monkey]

So are you happier with it now? Are the window tints staying now?

[poprodder]

yes and yes!!!

[Manky Monkey]

 

[poprodder]

went to the seaside today.....................................the minx enjoyed it!!!!

[cunningplan]

Where's that? I am sure I've been there 

[poprodder]

5 mins from my house!!! and our club meeting place!!!

good old sunny little poland great yarmouth.

[cunningplan]

was there in May in the Haven site just up the road.

hillman superminx 1962

[poprodder]

pass the jigsaw

[poprodder]

well the jigsaw did'nt come out but grinder and mr welder did, arch cut on outer skin, inner skin then cut leaving 12mm of steel which was then sliced and hammered upwards then welded to outer skin. then a 4mm rod was bent and welded to outer skin. a skim of filler around, then sand an coat of redoxide. still to do other side.