I don't not know nuffink about them sparky 'lectrics
My day off today, so I spent it running a few errands. Nipped over to Berkshire to see Bernie the fabricator to get some TIG welding done for my motorcycle & while I was there, reminded him about the steel sheet he was going to guillotine to size for me, 3 months ago.
It's for the doors. A 10mm wide strip of 1mm steel, which will go around the top of the door to space the inner window trim out to the right position; plus some 1.8mm sheet to replace the strip along the bottom of the door.
We welded that in when Loony & I first built the Pop because the floors are 4" above the bottom of the doors, so the door panels don't reach right to the door bottoms. We used some thin sheet we had to hand & it's distorted, creating a wavy panel. I also want to weld in the reflector mounts that Hornet made for me, which fit from the back of the panel. I'm going to modify the diagonal brace across the door to make fitting the glass easier, so a stiffer bottom panel will also put some strength back in the door.
No power supply at the lock-up for welding, so I'll need to find some workshop space I can rent. Probably a days worth of faffing about to do on each door.
Any decent welders want 2 days of paid work?
