August 10, 2022, 08:17:05 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Manky Monkey Motors Merchandise now available Cool Items at cool prices http://www.mankymonkeymotors.co.uk/merchandise.html
 
   Home   Help Search Calendar Gallery Login Register  
Pages: [1]
  Print  
Author Topic: Reliant Axle  (Read 70 times)
TwistedPatience
Hero Member
*****

Karma: 195
Posts: 3164


Teetering on the edge of insanity


« on: July 10, 2022, 02:05:43 PM »

Well finally after 22 years I'm in need of a back axle seems they have gone up in price since I last bought one (attached to a car).

Any Monkeys out there with a spare? Not too bothered about ratio as I will continue to use my Diff as its only the tubes that have finally rusted out.

Logged

"It's time to raise the Finger,
That middle digit takes your point and drives it home"
Olds
Hero Member
*****

Karma: 153
Posts: 5558



« Reply #1 on: July 21, 2022, 03:40:04 PM »

If your diff is OK then may be better to get new tubes made.
Logged

Getting older but no wiser! Just using bigger hammers.
The answer to most problems, fire and lots of it.
TwistedPatience
Hero Member
*****

Karma: 195
Posts: 3164


Teetering on the edge of insanity


« Reply #2 on: August 05, 2022, 07:39:56 AM »

Just got to find some any ideas?
Logged

"It's time to raise the Finger,
That middle digit takes your point and drives it home"
merv
Hero Member
*****

Karma: 88
Posts: 2854



« Reply #3 on: Today at 07:03:19 PM »

Hi twisted
Some time ago now i bought two lengths of steel tube from a steel company on ebay and had a local engineer turn the ends down to fit the diff. I had the hub carrier ends cut off the old tubes and reamed out for the new tubes to fit inside and then welded up. all turned out well. the tubes ended up being thicker than the original ones.
Hope this give you some ideas.
Logged

Why do every five minute job take all day, and
if it can go wrong it will go wrong
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!