Kitten and Robin halfshafts

[max888]

Hi, can anyone tell me if the Kitten half shafts are interchangeable with other Reliant shafts? Got to the point of replacing the one I broke the thread off but can only find Robin / Rialto shafts. Looking at the end of the axles, mine's from a Kitten. Axle length not an issue as making new tubes anyway but more concerned over diameter / splines.

Cheers for any advice.

Andy

[Olds]

Pretty certain that the half shafts would be the same the same as the early Robin / Rialto (10" wheels). Think the bearing size change happened when the wheel size was increased to 12" in about 89.

[fifer]

Info on later half shaft dimensions on the 12 inch wheeled versions at my site ;

https://sites.google.com/site/fifersrelianthintstips/axle-rebuild
.
.