Reliant A axle diff

[steve brock]

Reliant A axle diff required, if you have one can you separate the axle and give me the diff complete?  can arrange courier n pay ya the going rate .. TA in advance Steve

[terry t]

Reliant A axle diff required, if you have one can you separate the axle and give me the diff complete?  can arrange courier n pay ya the going rate .. TA in advance Steve

Steve.as you have the crown wheel. you only need the diff unit. you can take the crown wheel off the old diff.  and fit it to the new diff unit   

[steve brock]

Thanks so where do I get one from? ...Oh I thought the shafts were different diameters bit confused now... Ummm

[terry t]

Thanks so where do I get one from? ...Oh I thought the shafts were different diameters bit confused now... Ummm

yes the shafts are different diameters on some. but the splines that fit into the diff.  are the same.
Steve i have a diff here with a cracked casing witch i was going to get repaired. make me an offer on the diff. if you let me know the diameter of you shafts and splines i will check

[steve brock]

GREAT  is the diff ok? I will measure shafts tomorrow I'm bidding on a couple of axles on eBay so I'm not sure what to offer for a diff? You tell me cause don't want to insult  TA very much I can get collected too 

[terry t]

Hi Steve here are the measurements for the diff housing and half shaft.
the diff seems ok. its form an A diff unit

Reliant A axle diff

[terry t]

Hi Steve here are the measurements for the diff housing and half shaft.
the diff seems ok. its form an A diff unit

Reliant A axle diff

Hi Steve. are you still intrested in this diff

[steve brock]

I hope the one that's coming to me is ok! if it's not I'd love it... how much you want for it fella and many many thanks for your time..

[terry t]

I hope the one that's coming to me is ok! if it's not I'd love it... how much you want for it fella and many many thanks for your time..

Ok Mate. glad your sorted.
i don't really know what its worth on it own. the axle is now good with out it   .
still i shall put it back on the shelf with the others

[steve brock]

Ipaid 50 for the one from rhino trikes, not sure what axle provides the best ratio but after converting mine with various bits I had no choice as frame welded to suit it, quite diff icult (excuse the pun) to find these without getting a whole axle