Can some one please help with a problem that's driving me and bikerpsycho mental...wibble wibble!!
Bikerpsycho has an intruder 750, the clutch went so between us we fixed it!!! Fixed being a matter of opinion. Its a hydraulic clutch. The clutch is not disengaging the drive. If you pull in the clutch lever and try to start the engine it pulls forward. I suggested bleeding the master cylinder... that did'nt work but I noticed that when you pump the lever, some small bubbles come in to the resevoir and if you pull the lever in quickly some of the fluid comes up like a little (tiny) fountain, about half an inch high. Would this be a clue that the master cylinder seals are banjaxed? It may be a very basic question but we do need a little help...Please.
We can then sort it out and get the little bugger out from under my feet sometimes. He's a good lad but you can have too much of a good thing

( I expect he'll read this and i could be in trouble .... again

)
Thanks a lot
Regards
Keith