welder problem

[spanners]

OK so this is fixed,OR maybe not,
I put it back together with the intention of removing the, switch out of the gun,
But on pluggin it in i found that it works again ,

welder fairy,s 

[scannerzer]

   

[hunter]

I know less than nothing about welders but if you take something non-working apart and put it back together and it works - you've usually fixed a loose or dirty connection!

I agree but when i took it apart i made note of how tight the connections were,
And they were all tight.

[BikerGran]

So maybe there's bit of dry solder somewhere - in which case it may do it again....   

[hunter]

Exactly.

[andyrennison]

or a dodgy wire. Still, you cant fix what ain't broken, so use it till it happens again then try wiggling the wires etc