Manky Monkey Motors

Technical Section => Trike Tech => Topic started by: Chinster on September 16, 2020, 03:24:32 PM



Title: axle identification
Post by: Chinster on September 16, 2020, 03:24:32 PM
Hi All ,
aint been on here for a spell
wondering if any of you can identify an axle i have ?
It's got 4 bolt pattern holding backplate on an a casting number of 70850
much appreciated ;)


Title: Re: axle identification
Post by: Clive on September 16, 2020, 08:25:29 PM
Can’t help, but just thought I’d say hi, buddy. Hope you and yours are well


Title: Re: axle identification
Post by: Manky Monkey on September 16, 2020, 08:48:03 PM
Hiya.
Have you got a photo of it?


Title: Re: axle identification
Post by: Olds on September 17, 2020, 07:23:53 AM
I assume you are referring to a Reliant axle.
 If there is no letter stamped with the number it should be a 3.23:1 ratio.
Info from Fifers excellent site...
STAMP MARK ;

A = 3.23 { The Crown wheel has 42 teeth and the Pinion has 13 teeth }

X = 3.23 { The Crown wheel has 42 teeth and the Pinion has 13 teeth }

No letter = 3.23 { The Crown wheel has 42 teeth and the Pinion has 13 teeth }

B = 2.78  { The Crown wheel has 39 teeth and the Pinion has 14 teeth  }

L = 3.545 { The Crown wheel has 39 teeth and the Pinion has 11 teeth }

F = 4.11 { The Crown wheel has 41 teeth and the Pinion has 10 teeth }


Title: Re: axle identification
Post by: Chinster on September 17, 2020, 08:53:42 AM
cheers all will get a decent pic shortly


Title: Re: axle identification
Post by: Chinster on September 17, 2020, 09:52:59 AM
Can’t help, but just thought I’d say hi, buddy. Hope you and yours are well

is this the same Airbrush wizard Clive ?;)


Title: Re: axle identification
Post by: Chinster on September 17, 2020, 10:03:57 AM
pics hopefully


Title: Re: axle identification
Post by: Chinster on September 17, 2020, 10:08:10 AM
pic 2


Title: Re: axle identification
Post by: Chinster on September 17, 2020, 10:13:27 AM
pic


Title: Re: axle identification
Post by: Chinster on September 17, 2020, 10:26:12 AM
I have to change the seal behind prop flange so hopefully i can order the right part once axle model identified
cheers all


Title: Re: axle identification
Post by: Chinster on September 17, 2020, 10:28:14 AM
many thanks for info olds  ;)


Title: Re: axle identification
Post by: Clive on September 17, 2020, 06:23:59 PM
Can’t help, but just thought I’d say hi, buddy. Hope you and yours are well

is this the same Airbrush wizard Clive ?;)

Don’t know about wizard, but I have been known to dabble with an airbrush :D :D


Title: Re: axle identification
Post by: Olds on September 17, 2020, 06:34:41 PM
Pretty certain that all axles after 1973, be it a Kitten, Rialto, Robin or Fox, had the same pinion seal.
Part number 25955.


Title: Re: axle identification
Post by: Chinster on September 18, 2020, 08:33:54 AM
many thanks olds  ;)


Title: Re: axle identification
Post by: morrag on September 22, 2020, 03:31:42 PM
When all else fails...........take existing out and check no. or....measure it mayybe?  ;)


Title: Re: axle identification
Post by: Chinster on September 24, 2020, 10:06:23 AM
aye morrag that be best option
ordered one a while back but aint got same part number so will whip old un out an measure
cheers