|
Title: steering stem nut Post by: merv on May 13, 2020, 03:29:17 PM would any one know of a nice domed chrome nut to replace the flat steering stem nut on a ST 1100
Title: Re: steering stem nut Post by: Dslam on May 13, 2020, 04:58:54 PM There may be one available from another bike which might be difficult to source or identify. I think you would need to make/have made one from stainless.
Title: Re: steering stem nut Post by: Olds on June 08, 2020, 05:10:11 AM Perhaps a big Honda cruiser like the Valkyrie. Or a cover to go over the existing nut.
Title: Re: steering stem nut Post by: merv on June 08, 2020, 08:00:53 AM That's what i was thinking, cant find anything like it. And what i can find its in the USA and they want far to much for shipping, to much of a gamble for it not to fit. I'll have to try and find someone to make one if i'm lucky.
Title: Re: steering stem nut Post by: Olds on June 08, 2020, 08:30:09 AM Think the top nut is 30mm or 32mm AF. Big truck wheel nuts are about these sizes so you should be able to get chromed plastic covers but they might be a bit tall. Plus I doubt they'd be cheap. :-\
Title: Re: steering stem nut Post by: Olds on June 08, 2020, 04:57:48 PM Handrail end cap something like one of these should cover it. Perhaps not from these people though.
https://www.ebay.co.uk/itm/Staircase-304-Stainless-Steel-Decorative-Hemisphere-38mm-Dia-1mm-Thickness-4pcs/302366498925? Title: Re: steering stem nut Post by: merv on June 09, 2020, 05:41:42 PM Thanks Olds, why not from the site you showed
|