Manky Monkey Motors

Classified Adverts => For Sale => Topic started by: Manky Monkey on November 08, 2019, 09:51:22 AM



Title: Dragster for sale
Post by: Manky Monkey on November 08, 2019, 09:51:22 AM
My brother & sister in law are selling one of their dragsters:

After a great season with the slingshot and several months of deliberation we have reluctantly decided to sell the Altered Chassis, this will be a great project and unusual Dragster for someone.

For Sale
Unique Competition Altered in kit form
We started this build some ten years ago and then got side tracked with the slingshots , we have come back to it a couple of times and added to it but now have come to realise that we have too many toys and not enough space or time , it’s got to go . The package includes pretty much everything needed to build up a complete roller ( no engine or transmission ) .
150” wheelbase full chrome moly chassis to SFI 10.2 , 6.00 seconds . The chassis has been inspected and passed but the cert is out of date , I am quite happy to arrange for it to be re-tagged here , at cost , for the buyer .
Front axle is included along with hairpin radius rods , spindles , discs and calipers , wheels , tyres and steering linkage . Drag link , pitman arm , cross shaft and steering box are all fitted along with Q/R butterfly , the rod ends for these are missing .
Rear axle is fitted , Ford 9” case with ( I believe ) Oldsmobile ends and floating hubs , the locking rings for these are missing . Diff is fitted and comes with Mark Williams custom made shaft and couplers to suit shorty Glide , drive shaft cover is fitted . Drive axles , Rear wheels and tyres are included but tyres are strictly for set up only , they are past their racing life .
Motor plate patterned for SBC is fitted as are foot plates , brake lever , shift lever and throttle pedal . The seat is included , fully upholstered , and there are several other pieces made but not fitted , belly pan , fuel and breather tanks , switch box etc.
The body is a completely unique fibreglass split screen Morris 1000 , narrowed , sectioned and chopped . All the original external mounting points are moulded in so that repro door handles , boot handle and light clusters will fit . The body is straight out of the mould so will require finishing , framing and mounting . It was built to fit over the chassis so that the cage will not have to poke through the roof .
All the above, £5,500
Some photos show a transmission fitted , this is not included , although we have no plans for it and would be open to serious offers .


Title: Re: Dragster for sale
Post by: Manky Monkey on November 08, 2019, 09:51:55 AM
.


Title: Re: Dragster for sale
Post by: Manky Monkey on November 08, 2019, 09:52:24 AM
.


Title: Re: Dragster for sale
Post by: Manky Monkey on November 08, 2019, 09:52:59 AM
.


Title: Re: Dragster for sale
Post by: Manky Monkey on November 08, 2019, 09:53:39 AM
.


Title: Re: Dragster for sale
Post by: Manky Monkey on November 08, 2019, 09:54:09 AM
.