|
Title: Top yokes Post by: merv on July 07, 2019, 06:22:30 PM Would any one know of another top yoke that would fit a st1100 that don't have the risers slanting backwards
Title: Re: Top yokes Post by: hornet6 on July 09, 2019, 06:52:51 PM Hi Merv. Cant you take the top yoke to a local machine shop and have the risers machined lower, then have them re-drilled and tapped out ?
Title: Re: Top yokes Post by: merv on July 11, 2019, 04:51:37 PM Hi hornet
the trouble is the riser holes in the top yoke is angled all the way through the yoke, the st 1300 ones are flat but there's a width difference which makes them no good unless i change the lot , if i did that i don't the brake calipers would fit on the front wheel |