|
Title: reliant manifold Post by: hornet6 on November 27, 2018, 08:51:40 PM Hi. Are all reliant exhaust manifolds the same ? At the moment, I might be able to get some 5mm thick plate laser cut for the exhaust ports and use stainless tubes for the exhaust down tubes.
Title: Re: reliant manifold Post by: stinkey on November 27, 2018, 11:17:31 PM I've built ( almost?) a stainless exhaust 4 branch manifold for my trike..hopefully finish it next year?
Title: Re: reliant manifold Post by: Manky Monkey on November 28, 2018, 06:49:33 PM I bought a couple of tubular manifolds from a guy on eBay for my last 2 trike builds.
Title: Re: reliant manifold Post by: Olds on November 29, 2018, 05:22:34 AM The cast ones are all pretty much the same. Some are better cast port wise, but I think that's about it.
As shown by the pic above, all tubular systems I've seen end up with spacers so the inlet manifold clears the exhaust, that pushes the carb out further. That's why I kept the standard setup. |