|
Title: headstock Post by: terry t on July 03, 2011, 04:38:34 PM is there a sort of standard size for the headstock. mine is 165mm long x 63mm dia. to take 55mm x 35mm bearings.
Title: Re: headstock Post by: RODeo on July 03, 2011, 04:47:32 PM One thing to remember when sorting out the headstock..make sure that there are a couple of cut outs in the 'shoulder' where the bearing sits,to allow for a drift to be passed down from the opposite end of headstock and be placed in the notch to knock out the bearing outer ring .I didnt ,and had to spend quite a while very carefully cutting out the outer ring with a dremmel and a cutting wheel. I broke about 30 wheels making several cuts, before it finally came out!
Rod Title: Re: headstock Post by: zakboy on July 05, 2011, 01:28:23 PM is there a sort of standard size for the headstock. mine is 165mm long x 63mm dia. to take 55mm x 35mm bearings. is this the size bearings your looking forTitle: Re: headstock Post by: terry t on July 05, 2011, 02:29:38 PM is there a sort of standard size for the headstock. mine is 165mm long x 63mm dia. to take 55mm x 35mm bearings. is this the size bearings your looking for |