|
Title: paint stripper Post by: hornet6 on January 23, 2011, 10:13:47 PM Hi all...Do you think its ok to use paint stripper on my mag wheels,on my project,rather than getting em bead blasted. ??? ???
Title: Re: paint stripper Post by: Manky Monkey on January 23, 2011, 10:38:25 PM I've used it to strip clear lacquer off alloys without any problems.
Title: Re: paint stripper Post by: nabsim on January 24, 2011, 01:51:47 PM I used Nitromorse on the factory GM wheels okay. In the past I have used a caustic oven cleaner that was chaeap and worked well but I suspect it was taken off the market due to H&S
Title: Re: paint stripper Post by: dobber on January 24, 2011, 02:20:03 PM at work i have a caustic soda bath for cleaning catering equipment, if i put ally in it turns black and pits straight away. strong mix tho. would be wary with wheels...
Title: Re: paint stripper Post by: toad on January 24, 2011, 03:21:31 PM twizzles got a caustic bath for stripping wheels prior to polishing. if he drops by he,ll point you in the right direction cheers toad ;)
Title: Re: paint stripper Post by: hornet6 on January 24, 2011, 06:47:42 PM cheers yow lot.....i might just buy a tin of nitromours and try a small area of the wheel and see what happens.
Title: Re: paint stripper Post by: thebigdogsix on January 24, 2011, 07:00:13 PM Be very very careful using caustic soda on aluminum as it gives of hydrogen :o
Title: Re: paint stripper Post by: hunter on January 24, 2011, 07:07:38 PM nitromours is fine mate i'v used i loads of times,on ali no problems,
make sure you were goggles and gloves. |