|
Title: Thread Conversion Post by: voodoo on June 25, 2009, 07:12:56 PM Hiya...ok gone braindead atm...I have tapped out the Fuel tap on that tank with an m10 1.5 (from my Helicoil kit,but have not inserted a coil)but cant think what that would be in inches?? Or does anyone know what tapping bit I would need to be able to fit a 1/4 BSP tap? anyone help out...Voodoo...
Title: Re: Thread Conversion Post by: brock on June 25, 2009, 09:39:44 PM http://www.newmantools.com/taps/bsp.htm
Title: Re: Thread Conversion Post by: voodoo on June 25, 2009, 09:53:17 PM Thx for the link...I am off to a tools shop tomorrow that do all the bsp cutters ect to buy a set of taps.....at least then i will have the option of being able to use either thread....Voodoo.....
Title: Re: Thread Conversion Post by: voodoo on June 26, 2009, 12:50:31 PM Well for now I have cut an internal thread 1/4 BSP so I can stick one of my old taps on the tank..its only a temp measure as it looks scruffy,but at least I can mount the tank and use it for a couple of days...Voodoo.......
|