Manky Monkey Motors

Technical Section => Bike Tech => Topic started by: Hagar on June 16, 2009, 06:12:04 PM



Title: Virago pictorial help
Post by: Hagar on June 16, 2009, 06:12:04 PM
I know this is a long shot but here goes  .....  I need a photo or line drawing of the rear brackets that hold the air cleaner pods , I'm putting as much as I can on the 'old girl' back to stock , the original rear brackets have been ground off and a pancake filter fitted , a 750 , 1000 ( mine  :-[ ) or an 1100  85 and up should all be about the same , so any of these should give me a clue what it looks like , I've tried 'google' and that mine of information the "Haynes" manual all to no avail .
 I've aquired a couple of nice shiney second hand 'pods' off 'evilbay' just need to work out how to fit 'em    ;D   ........

 cheers  ..  Hagar  ..   ;D


Title: Re: Virago pictorial help
Post by: Manky Monkey on June 16, 2009, 11:14:00 PM
Have a word with Klogan -he's got a triked Virago, which we'll be adding to the Motors, 3 wheels section very soon, (it's on the "to do" list K  ;)  ).


Title: Re: Virago pictorial help
Post by: klogan45 on June 28, 2009, 07:30:31 PM
How did you get on H??
Regards
k


Title: Re: Virago pictorial help
Post by: Hagar on June 28, 2009, 10:37:55 PM
The old girls in the shop at the moment  ...  a couple of odds 'n' sods and ( fingers crossed ) an mot , when she gets back I'm going to sort out the brackets for the pods and the battery box covers , then some new  fork seals and she should be good to go   .....  thats the theory anyway ( the best laid plans )   ......   ;D


  ..  Hagar  ..   ;D