Manky Monkey Motors

HI Guys, the good news is i've fixed the startes clutch and got the engine running, its very nice too, but, is'nt there always a but!! :(
When I pull the clutch lever in and put the bike in gear it stalls. I've adjusted the cable and it still stalls. The bike had not been ridden for a couple of years so looking for suggestions as to what the problem could be.
Is it possible/likely that the clutch plates are stuck together?  Do plates stick if not used for a long time? The plates could just be worn I suppose!
Not something that i've come across before.
I would appreciate some suggestions, but not things like burn it :( Get it nicked  :o etc lol ;D ;D
Thanks
K

Hey, hey, hey, bikerpsycho came in from work and reminded me that the bike has got a cut out on the stand, if the stand is down and you put the bike in gear, the engine cuts out.
 Never had this in 'my day' ;D you just rode off and if the stand was down it scrapped a bit then folded up, if you did'nt come a cropper first ;D ;D ;D
So we went out, started the bike and put the stand up and guess what, all appears to be well so far, the engine did'nt cut out. So a big thanks for your help Chris. My only excuse is that I had a senior moment ;D.
K

tut tut tut klogan he he he glad its all ok get it m.o.td soon.
bikerpsyco

Just a thought but try putting side stand up as it has got a cut out if it's down!

Sorry mate i should have read everything before i sent my thoughts on. Happy virago riding.

Thanks for taking the time to make a suggestion :), as it happens you were right ;D
K