|
Title: Kawasaki GT750 back brakes Post by: stoner on August 18, 2013, 06:47:01 PM Hi Guys, could you help, I have changed the internals of my rear brake but now cant get any presure at the bleed nipples, any ideas to get the brake fluid through
Title: Re: Kawasaki GT750 back brakes Post by: Olds on August 18, 2013, 09:05:45 PM Does the master produce flow and pressure?
Did the system work before the rebuild? Not sure the GT750 master will move enough fluid to operate the Reliant wheel cylinders. Title: Re: Kawasaki GT750 back brakes Post by: Manky Monkey on August 18, 2013, 09:29:45 PM I had that problem on my first trike build -an XS750 Yamaha. The original Yam cyclinder just didn't have enough oomph for 2 drums. So on all my other builds I used a 5/8" Girling cylinder. Worked fine.
Title: Re: Kawasaki GT750 back brakes Post by: trev on August 19, 2013, 10:58:24 AM threw it away on my gt750 trike and used a landrover one.
|