Title: Reliant A axle diff Post by: steve brock on November 03, 2011, 09:14:03 PM Reliant A axle diff required, if you have one can you separate the axle and give me the diff complete? can arrange courier n pay ya the going rate .. TA in advance Steve
Title: Re: Reliant A axle diff Post by: terry t on November 04, 2011, 09:47:29 PM Reliant A axle diff required, if you have one can you separate the axle and give me the diff complete? can arrange courier n pay ya the going rate .. TA in advance Steve Steve.as you have the crown wheel. you only need the diff unit. you can take the crown wheel off the old diff. and fit it to the new diff unit Title: Re: Reliant A axle diff Post by: steve brock on November 04, 2011, 10:09:42 PM Thanks so where do I get one from? ...Oh I thought the shafts were different diameters bit confused now... Ummm
Title: Re: Reliant A axle diff Post by: terry t on November 04, 2011, 11:24:06 PM Thanks so where do I get one from? ...Oh I thought the shafts were different diameters bit confused now... Ummm yes the shafts are different diameters on some. but the splines that fit into the diff. are the same.Steve i have a diff here with a cracked casing witch i was going to get repaired. make me an offer on the diff. if you let me know the diameter of you shafts and splines i will check Title: Re: Reliant A axle diff Post by: steve brock on November 05, 2011, 12:41:39 AM GREAT :o is the diff ok? I will measure shafts tomorrow I'm bidding on a couple of axles on eBay so I'm not sure what to offer for a diff? You tell me cause don't want to insult TA very much I can get collected too ;D
Title: Re: Reliant A axle diff Post by: terry t on November 05, 2011, 07:00:03 PM Hi Steve here are the measurements for the diff housing and half shaft.
the diff seems ok. its form an A diff unit (http://i44.tinypic.com/a3fj2w.jpg) Title: Re: Reliant A axle diff Post by: terry t on November 06, 2011, 07:36:57 PM Hi Steve here are the measurements for the diff housing and half shaft. Hi Steve. are you still intrested in this diffthe diff seems ok. its form an A diff unit (http://i44.tinypic.com/a3fj2w.jpg) Title: Re: Reliant A axle diff Post by: steve brock on November 06, 2011, 07:54:28 PM I hope the one that's coming to me is ok! if it's not I'd love it... how much you want for it fella :) and many many thanks for your time.. ;D
Title: Re: Reliant A axle diff Post by: terry t on November 06, 2011, 11:03:58 PM I hope the one that's coming to me is ok! if it's not I'd love it... how much you want for it fella :) and many many thanks for your time.. ;D Ok Mate. glad your sorted. i don't really know what its worth on it own. the axle is now good with out it ???. still i shall put it back on the shelf with the others Title: Re: Reliant A axle diff Post by: steve brock on November 07, 2011, 08:51:41 AM Ipaid 50 for the one from rhino trikes, not sure what axle provides the best ratio but after converting mine with various bits I had no choice as frame welded to suit it, quite diff icult (excuse the pun) to find these without getting a whole axle
|