|
Title: Engine Start Post by: bitzman5 on April 18, 2010, 08:00:50 PM Hi guys bit of info im now going to start my NTV600 been stood under cover for 3 years do i need to put lube down bores ie diesel wd40 red X My trike now refuses to start iv put a nother set of carbs on full servise but now going to put it away before i put hammer thro it il take it apart and start from scrach so need the honda to keep me going over the summer and maybe winter still got 4 wheels but i would like to be on bikes in the summer
Title: Re: Engine Start Post by: twolanes on May 14, 2010, 02:21:16 PM Might be a bit too late for replying but here go,s. I would take out the plugs & pour some light oil in the bores & leave it for an hour or so to get past the rings, then with the plugs out turn it over to get the oil around everything, refit plugs & give it a go,DONT rev the nuts off it but let it warm up nicely. Good luck
|